Quick Answer: Can You Use USB Instead Of Ethernet?

Do you need an Ethernet cable for wifi?

No cables are needed to access a WiFi connection, providing greater mobility for users who can connect to a network or the Internet while moving freely around a space.

To access a network via an Ethernet connection, users need to connect a device using ethernet cable..

Can I plug an Ethernet cable into the wall outlet?

For a wired internet connection you can probably not use a cable directly to that socket. … Your wall socket is probably not connected to a router or a modem. If you want to use it, find the cable that goes into it an plug it into your modem’s Ethernet port. The wall socket is not actually a magic Internet source.

What is a Ethernet cable look like?

Ethernet cables look similar to phone cables. Ethernet cables have double the amount of wires to a phone cable (8 vs 4). The connector is slightly bigger than a phone cable’s connector. At the end of each cable is a small modular plug, often a Registered Jack 45 (RJ45) connector.

Do you need Ethernet for router?

A router always includes a main Ethernet port so you can connect the router to your modem. Most routers also have additional Ethernet ports so you can create a (typically) faster connection to a desktop PC or other stationary device using a physical Ethernet cable.

Where is the Ethernet cable located?

The Ethernet cable from the broadband modem should go to the router’s Internet or WAN port. The Ethernet cables from your Ethernet-based devices should go to any of the numbered ports at the back of the Linksys router (1, 2, 3 or 4).

What can I use if I don’t have an Ethernet cable?

it is possible your desktop connects to the wifi (Router or any wifi devices ) without Ethernet you have a required a USB wifi dongle. put it USB wifi dongle in your system and install the driver. and enjoy your internet without Ethernet cabal.

Can you use an Ethernet cable without a router?

If you have two PCs that you want to network but no router, you can connect them using an Ethernet crossover cable or establish an ad-hoc wireless network if they have Wi-Fi hardware. You can do anything you could on a normal network after hooking them up, including sharing files and printers.