# How Do You Convert RSSI To Distance?

## What is Bluetooth distance?

Range of Bluetooth is dependent on its class and primarily there are three classes of Bluetooth: Class 1 transmitting at 100 mW with a range of 100 meters or 328 feet.

Class 2 transmiting at 2.5 mW with a range of 10 meters or 33 feet (most Bluetooth headsets and headphones are common Class 2 devices)..

## How can I find the distance between two devices?

The short bursts of signals, with sharp rises and drops, makes the signals’ starts and stops inherently easier to measure. This means that the distance between two UWB devices can be measured precisely by measuring the time that it takes for a radio wave to pass between the two devices.

## How accurate are Bluetooth beacons?

The smartphone estimates the distance to the beacon by measuring the strength of the signal (RSSI) from the beacon. … When we perform position triangulation using beacons, we get around +- 2 meters accuracy of location if the smartphone is within 6 meters range of 2-3 beacons.

## How accurate are GPS?

Meanwhile, what about GPS? … If you’re outside and can see the open sky, the GPS accuracy from your phone is about five meters, and that’s been constant for a while. But with raw GNSS measurements from the phones, this can now improve, and with changes in satellite and receiver hardware, the improvements can be dramatic.

## What is a good RSSI number?

The higher the RSSI value, the stronger the signal. When measured in negative numbers, the number that is closer to zero usually means better signal. As an example -50 is a pretty good signal, -75 – is fairly reasonable, and -100 is no signal at all.

## Can Bluetooth measure distance?

7 Answers. Using bluetooth for localization is a very well known research field (ref.). The short answer is: you can’t. … Using bluetooth you can at best obtain a distance resolution of few meters, but you can’t calculate the direction, not even roughly.

## How accurate is Bluetooth location?

Bluetooth is all around us. Rick Merritt in EE Times: “Existing Bluetooth location services are accurate down to less than 10 meters based on signal strength and are used in museums, retail stores, and consumer asset trackers.

RSSI stands for Received Signal Strength Indicator. … For point-to-(multi)point applications, the optimal RSSI on each end of the wireless link is between -48 dBm and -65 dBm to achieve the highest possible data rates.

## Why is Bluetooth Needed for location services?

By requiring location services to access Bluetooth, you ensure that the user understands their location information may leak when they use Bluetooth. In versions of Android prior to Marshmallow, the user could use Bluetooth without location services enabled, but location information could leak.

meters),when the distance with the beacon nodes continue increasingˈthe signal amplitude changes tends gently, and the strength has jump phenomenon when the same node measures the same point several times. So, the RSSI ranging technology is accurate within 10 meters.

An RSSI of -55 (minus 55) is a stronger signal than -70 (minus 70). … If measured in negative numbers, a number that is closer to 0 usually means a better signal, a number that is -50 (minus 50) is a pretty good signal, a number of -70 (minus 70) is reasonable while a number that is -100 (minus 100) has no signal at all.

## How can I find the distance between two phones?

You can measure distance with sound. I’ve looked into bluetooth positioning and it istn’ quite as easy as detecting the signal strength. For really accurate results you also need to take into account the types of phone your using, the battery type and the condition of the battery.

## How do you calculate RSSI distance?

This uses the formula d=A*(r/t)^B+C, where d is the distance in meters, r is the RSSI measured by the device and t is the reference RSSI at 1 meter. A, B, and C are constants.

## How can I improve my RSSI signal strength?

This guide will help you understand why your WiFi signal can become weak and how to improve it on the cheap.Get a Modern Router. I just moved and recently got cable. … Don’t Hide Your Router. … Buy a WiFi Extender. … Check for Router Updates. … Use a Long Range Router. … Kick Your Neighbors Offline. … Perform a Speed Test.